ZNC-401
Universal NMEA Converter
(176x63x210mm)
(Brochure) |
ZNC-401 Universal NMEA Converter is a "Multi Analog Signal to NMEA-0183
(IEC-61162-1) Converter" for most kinds of Gyrocompass, Anemometer,
Speed Log, Rudder. This Universal NMEA Converter is useful for
interfacing between old navigation equipments and VDR, AIS, ECDIS.
This ZNC-401 Universal NMEA Converter is designed to consider very
high accuracy and
stability of temperature for using as core parts of Anemometer, Rudder.
All information is displayed in large LCD
and controlled dimmer and contrast.
1. Applications
1) Gyrocompass to NMEA Converter
- 1:1, 36:1, 90:1, 180:1, 360:1 Synch (26~115VAC,
50/60Hz or 400/500Hz)
- 90:1, 180:1, 360:1 Step signal (25~75VDC)
-
NMEA
format : $HEHDT,359.9,T*hh<CR><LF>
- for lower or higher voltage
of Step/Synchro signal, see below "option".
2) Anemometer to NMEA Converter
- Wind Angle : 1:1 Synch, 0~5V(10V) DC
- Wind Speed : 0~5V(10V) DC or 4~20mA or 1,710HZ at 60m/s
-
NMEA
format : $WIMWV,359.9,R,60,M,A*hh<CR><LF>
3) Rudder to NMEA Converter
- Angle : 1:1 Synch
- Rate : 1:1, 2:1 or 4:1 Angle rate
- NMEA
format :
$RARSA,359.9,A,,*hh<CR><LF>
4) Speed Log to NMEA Converter
- Speed : 0~5V(10V) DC, 4~20mA, 200/400 pulse/nm signal
- NMEA
format :
$VMVBW,49.9,A,,,*hh<CR><LF>
$VMVHW,359.9,T,,,49.9,N,,*hh<CR><LF>
2. Common Specification
- Input : Synch, Step, 0~5(10)V, 4~20mA,
Pulse Input
- Output : 3 NMEA outputs (one port is RS422 & RS232 selectable)
- Input Power : DC18~32V, AC17~23V
3. Option
- Input Power : 12V DC (9~17.5V DC)
- Low voltage version : ZNC-401L - Synch
10~50VAC, Step 10~45VDC
- Higher voltage version : ZNC-401H - Synch 55~230VAC, Step 55~165VDC
- Customizing software are available for non-standard
equipment and non-standard output data formats.
|
Rudder to NMEA Converter
Anemometer to NMEA Converter
(100mm x 130mm) |
ZNC-401-330 NMEA Converter Board is very useful
for using core parts of Rudder or Anemometer. This NMEA
Converter is designed for considering high accuracy and reliability.
1. Applications
1) Rudder converter
- 1:1 Synchro signal
- 1:1, 2:1 or 4:1 angle rate
-
NMEA format :
$RARSA,359.9,A,,*hh<CR><LF>
2) Anemometer Converter
- Wind Angle : 1:1 Synchro
- Wind Speed : 0~5V(10V) DC or 4~20mA or 1,710HZ at 60m/s
-
NMEA format :
$WIMWV,359.9,R,60,M,A*hh<CR><LF>
2. Common Specification
- Input : Synch/Step, 0~5(10)V, 4~20mA, Pulse Input
- Output : 3 NMEA output
- Input Power : DC18~32V, AC17~23V
3. Option
- Power : 12V DC (8~16.5V DC)
- Customizing software are available for non-standard equipment and
non-standard output data formats.
|
NMEA to
Step Gyro Converter
NMEA from/to
Speedlog Converter
NMEA to Speedlog Repeater
!! coming soon !!
|
ZNC-910 NMEA
to Step Gyro Converter converts from NMEA
data (HDT) to Step gyrocompass signal. This
NMEA to Step Gyro Converter is useful for
interfacing between new Gyrocompass (such Satellite
compass or without Step/Synch signal) and many navigation equipments
needed for heading signal.
This ZNC-910 NMEA to Step Gyro Converter is designed to consider very
high accuracy and
stability of temperature, and compliance with
IEC61162-1.
1. Applications
1) NMEA data to Step Gyrocompass
signal Converter
- Input : NMEA0183 Data (HDT)
- Output : 3 Phase Step signal.
2. Detail Specification
1) Input
- NMEA0183 Data ($HEHDT,359.9,T*hh<CR><LF>)
2) Output
- 4 phase step signal
- Step pulse Voltage : Depend on External power source. (DC75V Max.)
- Step pulse Current : Max. 300mA
- Common Plus/Minus selectable by internal Jumper
3) External Power for Step signal : DC12V~DC75V
3) Input Power : DC18~32V
3. Option
- Input Power : 12V DC (9~18V DC)
- Any other NMEA
sentence and step rate are are available for non-standard
equipment, please contact us.
|
